CLEANERS

Soak Solid

MAR SUPER SOAK PLUS

MAR SUPER SOAK PLUS is a heavy duty, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper and brass. MAR SUPER SOAK PLUS is non-chelated and non-emulsifying.

Features:
  • Wide operating range.
  • Powdered concentrate.
  • Floats most water soluble oils extending cleaner life.
  • Finds application on a wide range of substrates including brass and castings.
  • Non-dusting.
  • Removes all soils and a wide range of oils and compounds.
  • Medium alkalinity, non-chelated and non-emulsifying product.
Equipment
  • Tanks: Steel tanks and equipment are suitable.
  • Heating and Cooling: Steel heaters and coils are suitable.
  • Agitation: Not required.
  • Ventilation: Consult local environmental agencies.
Operating Conditions:
Optimum Range
MAR SUPER SOAK PLUS 60 g/litre 45 to 90 g/l
Immersion Time: 5 minutes 3 to 7 minutes
Temperature: 175°F 140 to 200°F (60 to 95°C)
Maintenance

The concentration of MAR SUPER SOAK PLUS is controlled by analysis.

Control:

MAR SUPER SOAK PLUS:

Analysis Procedure

Reagents:

  • Phenolphthalein Indicator
  • Standard 1.0 N Sulphuric Acid Solution

Procedure:

  1. Pipette a 5 ml sample into a 250 ml Erlenmeyer flask and add 100ml D.I. water.
  2. Add 5 drops phenolphthalein indicator.
  3. Titrate with 1.0 N sulphuric acid to colourless.

Calculation:

  • (ml of 1.0 N Sulphuric Acid) X 16.65 = g/litre MAR SUPER SOAK PLUS.
Please note that the information above for this chemical is partial. Click the button below to request full technical information sheet.
Request Technical Information Sheet

Quick Contact